Overclocking Legends: The Pentium 4 2.4C
So far this series has been all AMD. That’s fair for 2002 and 2003, but there was one Intel chip that overclockers loved just as much as the Bartons: the Pentium 4 2.4C. And if you read InsaneTek in 2004, you saw it over and over, because it was the CPU in a lot of our test systems.
From our 2004 TTIC NPH-1 review, which ran on a Pentium 4 2.4C at 3.0GHz.
What it was
In 2003 Intel moved its Northwood Pentium 4 to an 800MHz front-side bus, which was really a 200MHz bus sending data four times per clock, and added Hyper-Threading across the line. The new chips got a “C” on the end of the model number. The 2.4C was the slowest of them: a 12x multiplier on a 200MHz bus, for not much more than the price of a mainstream chip.
The multiplier was locked, like on every retail Pentium 4. But the bus wasn’t. Raise the bus from 200 to 250MHz and the 2.4C became a 3.0GHz chip. Raise it to 266 and it was 3.2GHz, the same speed as Intel’s top Northwood, for a fraction of the price. Good chips with good cooling went past that.
Why it worked
The Northwood core had headroom, and the 2.4C was the bottom bin of a line that went up to 3.4GHz. That’s the same story as the Athlon XP 1700+ and the Barton 2500+, but it took the right platform. Intel’s 865 (Springdale) and 875 (Canterwood) chipsets were great overclockers, and boards like the Abit IS7 and IC7 and the Asus P4P800 and P4C800 could run a 250MHz-plus bus with the memory on a divider. Asus even unlocked Intel’s memory speed-up trick, PAT, on its cheaper 865 boards, which made a cheap board perform like a Canterwood.
A bus that high meant fast memory helped a lot, which is why you see the 2.4C next to Winbond BH-5 and OCZ’s Booster in so many of our reviews.
Our test bench CPU
At least 21 of our reviews were tested on a 2.4C, from coolers to memory to power supplies. A few examples:
- Our Cooler Master Hyper 6 review ran a “Pentium 2.4C overclocked to 2.8” on an Abit IS7 with Buffalo BH-5.
- Our Thermalright XP-120 and Gigabyte 3D Rocket Pro reviews ran a “Pentium 2.4C overclocked to 3.0 - 1.6 vcore” on an Asus P4P800 Deluxe.
- Our Arctic Cooling VGA Silencers review ran a “Pentium 4 2.4C overclocked to 3.2GHZ” on the IS7.
- Most of our 2004 memory and power supply reviews, like the Kingston HyperX PC4300, the OCZ DDR Booster and the Enermax Noisetaker 470W, ran a 2.4C on an Asus P4C800-E “with droop mod,” a pencil or wire trick that stopped the board’s CPU voltage from sagging under load.
Our Cooler Master Ultra Vortex review called the Abit IC7 “the popular Abit IC7. Many enthusiasts are owners of this board.” That was the 2.4C crowd.
What happened
In 2004 Intel moved to the Prescott core and LGA 775. Prescott ran hot, and it didn’t overclock the way Northwood did. For a couple of years, if you wanted a fast Intel chip for cheap, you either kept your 2.4C or went looking for a Pentium M, which is coming up in this series in a few weeks. The Pentium 4 never had another chip like it.
Where it is now
The 2.4C is a retro chip now, and Socket 478 boards with working capacitors are getting harder to find. But for a while it was the chip that proved overclocking wasn’t just an AMD thing. A 2.4C at 3.2GHz on an IS7 or a P4C800 was a great gaming PC in 2003, and it’s why so many of our 2004 reviews look the way they do.
Next week: the first part of our benchmark spotlight, the tools we all ran from 2001 to 2005.
— Luke
